 |
Loss of Gloss
on HP Photo Imaging Gloss when using the Take-Up Reel |
|
|
Under high humidity conditions
(approx. >70%) the polymer chain in the coating of this media
relaxes and the drying rate decreases. If the printed media is rolled
onto a Take-Up Reel or is covered by another print, the contact
between the two surfaces could cause blotches in the gloss. Try
the following:
|
|
 |
-Reduce the level of
humidity (<70%) that the Printer is working in. To find the humidity
level, print the Service Configuration Print (Printer Setup Menu
/ Utilities / Test prints / Service config).
-Increase the Dry Time using the Front Panel (Refer to the User's
Guide).
-Do not use the Take-Up Reel or Bin for this media when humidity
levels are high. |
|