Color Calibration Failure - Color Calibration
cancelled.
corrective action
Unplug the power cable from the printer and wait
a few seconds.
Plug in the power cable again and try the Color Calibration
again.
corrective action
If this error code appears again, check the Color Calibration
print:
-If the Color Calibration was printed correctly without
any print defects,then check that the media is moving freely (backwards and forwards) while the printer is scanning it.
-If the Color Calibration was printed incorrectly, with
some print defects, replace the faulty Printhead of the color
where the defects were noticeable.
corrective action
If the Error Code continues,
replace the Carriage Assembly.
