If this error code appeared but was
NOT caused by a paper jam, then try the following:
Too much friction in the Slider Rod. Enter the Printer Information
utility ( » Printer
Information) and check the Scan-Axis usage.
If the percentage is close to 100%, then lubricate the Slider
Rod.
The Carriage is bumping into the Service Station. If the
carriage is stuck at the right hand side of the Printer and
cannot be moved out to the center of the Print Platen it is
because the Service Station cannot uncap the Printheads. In
this case replace the Service Station/Aerosol Fan Assembly
» Service Station
and Aerosol Fan.
Perform the Carriage Movement test »
Carriage Movement.
