 |
 |
|
system error - 86:01 |
|
|
Scan-axis shutdown - usually a
paper-jam caused by a blockage of the Scan-axis System. |
|
|
corrective action |
|
|
| |
Check that there are no obstacles
in the Scan-Axis which stops the
Carriage from moving freely. |
|
|
|
corrective action |
|
|
| |
Too much friction in the Slider Rod, try lubricating the Slider Rod. |
|
|
|
corrective action |
|
|
|
|
The Carriage is bumping into
the Service Station. If the Carriage is stuck at the right hand
side of the Printer and cannot be moved out to the center of the
Print Platen it is because the Service Station cannot uncap the
printheads. In this case replace the Service Station Assembly |
|
|
corrective action |
|
|
| |
Check that the belt is correctly
installed and not damaged. |
|
|
|
corrective action |
|
|
| |
Check that the Turnaround Pulley
is correctly installed. |
|
|
|
corrective action |
|
|
|
|
Replace the Carriage Motor Assembly. |
|
