 |
 |
|
system error - 86:11 |
|
|
Electronics Module failure. |
|
|
corrective action |
|
|
| |
Scan-axis shutdown during initialization.
Typically, this error occurs when the printer detects an incorrect
length. |
|
|
|
corrective action |
|
|
|
|
Unplug the power cable from
the printer and wait a few seconds. Plug in the power cable again
and check if the Error Code has disappeared. |
|
|
corrective action |
|
|
|
|
Check that the Paper-Axis Drive
Motor Assembly is correctly installed and that the bushing is correctly
locked into position. |
|
|
corrective action |
|
|
| |
Check that the Carriage moves
freely and DOES NOT bump into the Service Station. |
|
|
|
corrective action |
|
|
| |
If the Printheads are not installed,
maybe the carriage cover is not closed completely. |
|
|
|
corrective action |
|
|
|
|
If the Error Code continues,
replace the Carriage Assembly. |
|
