select printer | 4000 series | procedures | service calibrations | preventive maintenance
hp designjet 4000 series printers
» preventive maintenance
» Moisture on the Printer
» Noisy Carriage Bushing
» Belt Swelling
» Cleaning the Printer
» General Cleaning
» Cleaning the Drive Roller and Overdrive
» Cleaning the Center Platen
» Applying Oil to the Overdrive
» Lubricating the Carriage Assembly
» Scheduled Maintenance
» Level of Printer Usage
» send feedback or
comments
 

General Cleaning

Proper general cleaning should include the following:
To prevent an electric shock, make sure that the Printer is switched OFF and unplugged before any cleaning is performed. Do NOT let any water get inside the Printer.
1. Blow away dust accumulation with compressed air if available.
2. Clean the outer surface of the Printer with a damp sponge or cloth. Use a mild soap and water solution if necessary. Do not use abrasive cleaners.
3. Wipe the Printer dry with a soft lint-free cloth.
© 1994-2006 Hewlett-Packard Company