|
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||||||||||||||||||||
|
 |
Cleaning the Drive Roller and Overdrive
If ink is spilled on the Overdrive, remove the ink immediately. Due to the ink's reflectance, ink on the Overdrive can disrupt the Printer's edge-sensing function. To remove any ink from the Overdrive, perform the following procedure:
Prevent water or other liquids from running onto electrical components or circuits, or through openings in the Electronics Module.
1. Perform the Turn Drive Roller Utility.
2. Open the window and apply any common household cleaning solution (water based only) to a soft, lint-free rag and apply it to the Drive Roller and Overdrive surface while it is rotating. Make sure that you thoroughly clean the Drive Roller and Overdrive surface.
3. Press Enter when you have completed the cleaning procedure.
4. Allow the Drive Roller to dry before loading media in to the Printer.
|
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||