select printer | 500/800 series | service information | system error codes
hp designjet 500/800 series printers
» service information
  » service information
» troubleshooting
» system error codes
» hp ink supplies troubleshooting
» service test and utilities
» service calibrations
» print quality
» preventive maintenance
» functional overview
» downloads
» parts list
» disassembly
» send feedback or
comments
 
» System error - 93:10
 
Problem Description
     
 

Ink System startup failed (also » The Priming Procedure Fails for more information).

 
     

Corrective Action
     
 

Try the following:

Check for a leak in the Printer. If a leak is evident (there is ink on Printer components), replace the Ink Supply Tubes » Ink Supply Tubes.

Perform the Prime Tubes utility (Refer to » Prime Tubes) and check how long it takes to complete the procedure. If it takes too long to complete the procedure and there is no leak in the Printer, then replace the Ink Cartridges. If it takes a short time to complete the procedure, then replace the Ink Supply Tubes » Ink Supply Tubes.

 
     
 
© 1994-2006 Hewlett-Packard Company