 |
Status Messages |
| |
|
| |
These messages provide
only an action message for the user to perform. For information
on accessing detailed information on consumables refer to Obtaining
Ink Cartridge Information and Obtaining
Printhead Information.
|
| |
|
Status |
Description |
Procedure |
OK |
The ink consumable is working correctly |
None |
Insert |
There is no consumable installed |
Insert the correct consumable. In the case of the Printhead, if
the correct consumable is inserted, check the Carriage Tube Connector
is correctly connected to the Carriage. |
Setup |
The setup message is displayed when new tubes have been installed
into the Printer and you have installed the correct setup Printheads. |
When the setting up of the tube system is complete, the front panel
will display a message (XX04)Replace asking you to remove them and
replace them with `normal Printheads'. |
Low |
Ink Cartridge Level has reached it's low limit (100 ml.). This is
an early warning. |
New supplies should be obtained ready to replace the particular
color. |
Very Low |
Ink Cartridge Level has reached it's very low limit (50 ml.) |
Overnight printing should not be attempted. Priming of the Ink
Tubes should not be attempted. A new Ink Cartridge is strongly recommended
to prevent the Printer from interrupting a print. |
Empty |
Ink Cartridge is empty. The Printer stops. |
A new Ink Cartridge is required. Check image quality of prints in
progress. |
