select printer | 70/100/100plus/110plus | troubleshooting | system error codes
hp designjet 70/100/100plus/110plus printers
» system error codes
  » test prints
» system error codes
» 01:10
» 01:12
» 02:10
» 04:13
» 08:11
» 11:10
» 11:11
» 21:10
» 22:10
» 35:01
» 42:10
» 56:10
» 56:13
» 62:04
» 63:04
» 64:04
» 65:04
» 71:03
» 71:14
» 72:04
» 74:12
» 79:04
» 81:01
» 81:12
» 83:10
» 85:10
» 86:01
» 86:11
» diagnostics
» send feedback or
comments
 
system error - 01:12
Electronics Module failed during the firmware upgrade OR the Electronics Module failed during initialization.
corrective action
  If the Electronics Module failed during initialization, you must perform the Electronics Test to determine the cause of the failure.
corrective action
If the Electronics Module failed during the firmware upgrade, first perform an emergency firmware upgrade.
corrective action
If an emergency firmware upgrade is NOT possible or it didn’t work, replace the Electronics Module.
© 1994-2006 Hewlett-Packard Company