|
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
 |
|
|
||||||||||||||||||||||||||||||||||||||
|
 |
Color Calibration (HP Designjet 10ps/20ps/50ps)
The Color Calibration should ONLY be performed by the user when required.
The Color Calibration needs to be performed whenever:
» The environmental conditions have changed from the environmental conditions where the Color Calibration was applied.
» The printheads have been replaced. » The drop volume of any of the printheads has changed dramatically. If the Color calibration fails, print the information page and check the list of warnings under the printer status section.
The Color Calibration can be performed using the hp designjet system maintenance tool or via the software rip.
 |
||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||