System Error: 01.1:10
Problem Description:
Problem with the PrintMech PCA.
Corrective Action:
Try the following: |
|
- Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.
|
|
- Check that the cables between the PrintMech PCA and the Gamut PCI PCA are not damaged and are correctly connected.
|
|
|
- If the System Error continues, replace the Gamut PCI PCA.
|
|
Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.
