select printer | 4000 series | troubleshooting | system error codes
hp designjet 4000 series printers
» system error codes
» 02:10
» 03:10
» 06:03
» 06:10
» 07:10
» 08:11
» 11:10
» 21:03
» 21:12
» 21:13
» 23:10
» 24:03
» 24:10
» 26:14
» 27:03
» 27:14
» 41:03
» 41:10
» 42:03
» 42:10
» 43:10
» 44:10
» 44:11
» 51:10
» 52:10
» 53:10
» 54:10
» 55:10
» 56:03
» 56:10
» 61:01
» 63:04
» 64:04
» 65:04
» 66:08
» 67:04
» 68:03
» 71:03
» 71:04
» 71:19
» 72:04
» 73:03
» 74:00
» 74:01
» 74:04
» 76:03
» 77:04
» 79:03
» 79:04
» 81:01
» 81:03
» 81:10
» 85:03
» 86:01
» 86:03
» 86:10
» 86:11
» 91:02
» 91:10
» 93:11
» 98:02
» send feedback or
comments
 

System Error: 23:10

Problem Description:

Problem with the APS.

Corrective Action:

Try the following:
 
  • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.
  • Check that the APS cable is not damaged and is correctly connected to the PrintMech PCA.
  • Replace the APS Assembly.
  • Replace the PrintMech PCA.
  • If the System Error continues, replace the Gamut PCI PCA.
Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.
© 1994-2006 Hewlett-Packard Company