hp designjet 10ps, 20ps, 30, 30n and 50ps printers

select printer | 10ps/20ps/30/30n/50ps | disassembly | disassembly instructions

hp designjet 10ps, 20ps, 30, 30n and 50ps printers

» disassembly instructions

» disassembly instructions

» center cover

» right end cover

» left end cover

» ink supply station

» electronics module

» power supply unit

» service station

» encoder strip

» carriage motor

» cleanout assembly

» ink supply tubes

» carriage assembly

» carriage belt

» starwheel assembly

» ramp motor assembly

» output separator

» output mechanism assembly

» paper-axis motor drive assembly

» pick assembly

» feed roller assembly

» pinch assembly

» lower paper guide

» inner paper guide

» disassembly videos



	» send feedback or comments

starwheel assembly

Switch off the product and remove the power cable.

1. Remove the center cover

2. Remove 1 T-10 screw that secures the Starwheel Assembly to the right hand side of the printer.

3. Remove 1 T-10 screw that secures the Starwheel Assembly to the left hand side of the printer.

4. Remove the Starwheel Assembly.


privacy statement	using this site means you accept its terms

© 1994-2006 Hewlett-Packard Company