hp designjet 70/100/100plus/110plus printers

» disassembly instructions

center cover

Switch off the product and remove the power cable.

1. Remove the Top Cover

2. Release the Ink Supply Tubes from the Raceway Holder. Remove the Raceway Holder from the Printer.

3. Release the Tubes from the retaining clips in the Center Cover.

4. Remove 4 T-10 screws that secure the Center Cover to the Printer.

5. Remove 2 T-10 screws that secure the Center Cover from the rear.

6. Open the Printhead Door.

7. Remove the Center Cover from the Printer.


privacy statement	using this site means you accept its terms

© 1994-2006 Hewlett-Packard Company