select printer | 70/100/100plus/110plus | disassembly | disassembly instructions
hp designjet 70/100/100plus/110plus printers
» disassembly instructions
  » dissasembly instructions
» dissasembly videos
» top cover
» center cover
» right end cover
» left end cover
» ink supply station cover
» ink supply station
» electronics module
» power supply unit
» service station
» front panel
» encoder strip
» carriage motor
» cleanout assembly
» ink supply tubes
» carriage assembly
» carriage belt
» starwheel assembly
» print platen assembly
» ramp motor assembly
» spittoon
» pivot assembly
» feed roller assembly
» pick assembly
» inner paper guide
» OOPS sensor
 
» send feedback or
comments
 
right end cover
  
 
     
Switch off the product and remove the power cable.
   
  1. Remove the Center Cover
   
2. Open the Printhead Door.
   
3. Release the Door Sensor from the Right End Cover.
   
4. Remove 1 T-10 screw that secures the Right End Cover to the Printer.
   
5. Remove 1 T-10 screw from the Right Side Bracket.
   
6. Release the clips that secure the Right End Cover to the Printer (use a flat-blade screwdriver if necessary).
   
7. Remove the Right End Cover from the Printer.
   
© 1994-2006 Hewlett-Packard Company