There is a problem with the I/O Card
(happens during power-up).
Corrective Action:
Try the following:
-Disconnect the Network Cable and
check if the error still appears during power-up.
-If the error does not appear again, then the problem
may have been that the Printer was receiving some information through
the port while powering-up.
-If the error does appear again, then power OFF
the Printer, remove the I/O Card from the back of the Printer and
power ON the Printer again. Check if the error still appears during
power-up.
- If the error does
appear again, replace the Main
PCA or the Hard
Disk Drive).
- If the error does not appear again (powers-up correctly
without the I/O Card), then try inserting the I/O card in the second
slot to check if it works. If it doesn’t work in the second
slot, then replace the I/O Card. If the new I/O card also fails, replace
the Main PCA
or the Hard Disk
Drive).