select printer | 5000/5500 series | service information | system error codes | error codes
hp designjet 5000/5500 series printers
» system error codes
  » error codes
» ffff ffff xxxxxxxx
» ffff ffff 01dcxxxx
» ffff ffff 02b301b0
» ffff ffff 030d0170
or ffff ffff 030d0171

» ffff ffff 031609xx
» ffff ffff 03450097
» ffff ffff 036000bd
» ffff ffff 036e0136
» 01002D
» 010023
» 010030 034c095e
» 010040
» 010041
» 010042
» 010090
» 010091
» 010092
» 011000
» 040000 01E603D9
» 050000
» 050001
» 06030C
» 06040C
» 0A0000
» 0A0010
» 0A0020
» 0A0030
» 0A0040
» 0A0050
» 0A0060
» 0A0070
» 0B0000
» 0B0001
» 0B0002
» 0B0003
» 0B0004
» 0B0005
» 0B0006
» 0B000X
» 0B0010 xxxxxxxx
» 0B000A
» 0B000B
» 0B000C
» 0B000D
» 0B000E
» 0B000F
» 0C0030
» 0C0032
» 0C0040
» 0C00FF
» 0C1000
» 0C1001
» 0D0000
» 0D0000 033f019C
» 0D0002
» 0D0003 xxxxxxxx
» 0D0004 xxxxxxxx
» 0D0005 03180382
» 0FXXXX
» 0F0200 00b007bc
» 0F0200 00b007E5
» 0F0200 01E603d2
» 0F0100 03180382
» 1f500XX
» e50000
» send feedback or
comments
 
System Error: 1f500XX (Boot Failed)
     
Problem Description: This is an error related to the Hard Disk Drive, either the connections are bad or the Hard Disk Drive or the Main PCA are defective.
   
       
Corrective Action: Try the following:
 

-Unplug the Printer, remove the HDD cover and check that the two cables (a flat one and the power cable) are connected. Also check that the flat cable connector is clipped in correctly. If the problem persists, replace the Hard Disk Drive.
-If the problem continues, check that the Green and Orange LED’s on the Main PCA are ON. If they are not ON, probably the PWS or its connections are defective. If the two LED’s are ON and the error continues, replace the Main PCA.

 
© 1994-2006 Hewlett-Packard Company