select printer | 5000/5500 series | service information | system error codes | error codes
hp designjet 5000/5500 series printers
» system error codes
  » error codes
» ffff ffff xxxxxxxx
» ffff ffff 01dcxxxx
» ffff ffff 02b301b0
» ffff ffff 030d0170
or ffff ffff 030d0171

» ffff ffff 031609xx
» ffff ffff 03450097
» ffff ffff 036000bd
» ffff ffff 036e0136
» 01002D
» 010023
» 010030 034c095e
» 010040
» 010041
» 010042
» 010090
» 010091
» 010092
» 011000
» 040000 01E603D9
» 050000
» 050001
» 06030C
» 06040C
» 0A0000
» 0A0010
» 0A0020
» 0A0030
» 0A0040
» 0A0050
» 0A0060
» 0A0070
» 0B0000
» 0B0001
» 0B0002
» 0B0003
» 0B0004
» 0B0005
» 0B0006
» 0B000X
» 0B0010 xxxxxxxx
» 0B000A
» 0B000B
» 0B000C
» 0B000D
» 0B000E
» 0B000F
» 0C0030
» 0C0032
» 0C0040
» 0C00FF
» 0C1000
» 0C1001
» 0D0000
» 0D0000 033f019C
» 0D0002
» 0D0003 xxxxxxxx
» 0D0004 xxxxxxxx
» 0D0005 03180382
» 0FXXXX
» 0F0200 00b007bc
» 0F0200 00b007E5
» 0F0200 01E603d2
» 0F0100 03180382
» 1f500XX
» e50000
» send feedback or
comments
 
System Error: 0A0050 (Non-Continuable)
     
Problem Description: The Printer has detected a leak in the Tubes System - Should ONLY appear in printers with the Ink Leak Detector installed.
   
       
Corrective Action: Try the following:
 

-Check for ink in the Ink Leak Detector and, if present, replace the complete Tubes System (See Ink Tubes System).
-The Ink Leak Detector could have been trigggered due to condensation in the Printer. Power OFF the Printer and allow the Printer to dry for 15 minutes. Power ON and check if the System Error Code has disappeared.
-Replace the ISS PCA (See Ink Supply Station (ISS) PCA).

 
WARNING: Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.
   
© 1994-2006 Hewlett-Packard Company