hp designjet 90/120/130 series printers

select printer | 90/120/130 series | disassembly | disassembly instructions

hp designjet 90/120 and 130 series printers

» disassembly instructions

» disassembly instructions

» center cover

» right end cover

» left end cover

» ink supply station

» electronics module

» power supply unit

» service station

» encoder strip

» carriage motor

» cleanout assembly

» ink supply tubes

» carriage (120/120nr)
» carriage (90/90r/ 130/130nr)

» carriage belt

» starwheel assembly

» print platen assembly

» ramp motor assembly

» pivot assembly

» feed roller assembly

» pick assembly

» inner paper guide

» paper-axis motor
» bypass platen
» bypass platen actuator (90/90r/130/130nr)

» disassembly videos



	» send feedback or comments

paper-axis motor assembly



	Switch off the product and remove the power cable.


			1. Remove the Center Cover

			2. Remove the Left End Cover

			3. Remove 2 T-10 screws that secure the Paper-Axis Motor Assembly.

			4. Disconnect the Paper-Axis Motor cable.

			5. Release the belt from the Paper-Axis Motor. Remove the Paper-Axis Motor Assembly from the Printer.


privacy statement	using this site means you accept its terms

© 1994-2006 Hewlett-Packard Company