Air Pressurization System (APS)
WARNING: Switch off the Printer and remove the Power Cord.
3. Remove the Extension Cover (Only for the 60" model).
4. Remove the Ink Supply Station (ISS)
NOTE: When removing the APS from the ISS, take care with the tube and cables attached to the ISS.
6. Push the retaining clips on the left side of the APS to release it from the ISS.
Installation of APS
WARNING: When Installing the Air Pressurization System make sure the tube and wires are placed in the dedicated slots and perform the following steps:
1. Before installing the APS on the ISS, insert first the 3 cables and then the tube in the dedicated slot.
NOTE: Before installing the ISS on the Printer, make sure the cable and tube are inserted in the ISS slot.
